Contents
- Index
Metal Strip Array
The Metal Strip Array method is an easier way to generate many Strips of same type and same length at one time. To use the Strip Array method, the user must setup the strip properties first using the material setup dialog box. After material setup, the user can click Strip Array button on the toolbar. The strip array dialog box will appear. The user must select the soil strip type from the pull down list, and provide the start elevation, end elevation, vertical spacing, angle from horizontal (=0), length of the unbonded sections (=0) and the length of the bonded sections to the respective boxes. Once the user click the Close button, metal strip will appear on the profile.